On this page
To track certification expiry for a crew, keep one register with every worker’s tickets and their expiry dates, review it on a fixed day each month with a look-ahead window long enough to book a renewal course, and check it again whenever you put a crew on a job. Most lapses are not caused by anyone ignoring a rule. They happen because nobody was looking at the date until somebody else asked for the card.
That is the quiet failure. A ticket expires on a Tuesday, the technician keeps working, and nothing seems wrong until a client, an auditor or an inspector asks to see it. By then the question is “how long has this person been working without it.”
Why certification expiry slips through
Tickets live in the wrong places. The card is in a wallet, a photo of it is on a phone, and the date is in a spreadsheet that one office person updates when they remember. Every one of those works until that person is on vacation or the technician changes companies.
Expiry is also a future event, and future events lose to today’s work. A renewal course needs a seat and a day off the tools. Notice the date the week it passes and you are choosing between pulling someone off a job and hoping nobody checks.
What to record for each certificate
For every ticket each worker holds:
- The worker. Full name as it appears on the card.
- What it is. The course or certificate type, and the level where there is one.
- Who issued it. The training provider or scheme, and the certificate number.
- Completion date and expiry date. Both. Some records only need the completion date, but your crew needs the expiry date.
- A copy of the card. Both sides, legible.
- Who checked it, and when. A name and a date for whoever looked at the original.
That last line matters. Dates typed in from memory prove nothing. A register that says who verified each card does.
Which dates the rules actually care about
What you must keep depends on where the work is. A few examples from our requirements finder, which lists the instrument and section for each jurisdiction:
- Ontario. Working at heights training from an approved provider is valid for three years (O. Reg. 297/13 ss. 7, 8(1)). The employer maintains a record with the worker’s name, the approved provider, the date of successful completion and the approved program (s. 10). This is separate from the training and instruction record under O. Reg. 213/91 s. 26.2, and both are required (O. Reg. 297/13 s. 9).
- British Columbia. For rope access, the employer must ensure and document that the worker holds a valid certificate from one of the schemes the regulation names, and the certificate must be produced for inspection on request (OHS Regulation s. 34.4).
- United States, construction. The fall protection training certification record names the employee, the date or dates of training and the signature of the trainer or employer (29 CFR 1926.503(b)(1)). Only the latest certification has to be kept (1926.503(b)(2)).
- United States, general industry. Training is required, but there is no written certification-record requirement (29 CFR 1910.30). Many employers keep one anyway, because clients ask.
Rope access certificates carry an expiry date set by the scheme that issued them. Take that date from the card itself, not from what you remember the cycle to be.
How to track certification expiry for a crew, week to week
One register, one owner, one backup. Pick the person responsible for keeping it current and a second person who knows where it is and how it works. A register only one person understands fails the first time that person is away.
A fixed review day. Once a month, look at everything expiring in your look-ahead window. Set the window by how long it takes to get a seat on the renewal course in your area, plus a margin. Anything inside the window gets a course booked that week, not a note to book it.
Check at scheduling, not just at review. The moment that matters is when someone is assigned to a job. Before a crew list goes out, confirm every name on it holds the tickets that job needs, valid on the dates of the work, not just today.
Verify new hires before their first job. Look at the original card, take a copy and record who checked it. In US construction, if you rely on training a previous employer gave, the record shows the date you determined that training was adequate (1926.503(b)(1)).
Decide in advance what happens at expiry. Write down who takes the worker off work that needs the ticket, who books the course and who updates the register. Deciding that in a busy week is how exceptions become habits.
A spreadsheet can do all of this if someone owns it and the review day happens. The failure is rarely the tool. It is one person’s file and one person’s memory.
Keeping the record in RopeDocs
In RopeDocs, employee records hold each worker’s certifications and their expiry dates in one place, against your company account rather than anyone’s personal files. Employees do not need a login to have a record, so the whole crew can be in there, not just the people who fill out forms. That makes the monthly review and the check at scheduling a matter of looking at one screen. It does not book the course or decide who works; your process still has to do that.
For more on keeping records that survive staff turnover, read what to keep for equipment inspections, see the FAQ for how Employees and Field Users differ, or check pricing.
You can try it with your own crew on the free trial.



